1. Light accumulated dust may be removed from the heater with a soft
cloth. Wipe the exterior surfaces of the heater occasionally with a
cloth moistened (not dripping wet) with a solution of mild detergent
and water. Dry the case thoroughly with a soft dry cloth before operat-
ing the heater.
2. The fan motor is lubricated by the factory, and will require no further
lubrication.
3. No other user maintenance is required or recommended. If service is
required, send your heater to the nearest authorized servicedepot.
4. Store heater in a clean and dry place when not in use.
REMEMBER - Portable electric heaters are designed for spot heating,
or as a supplementary heat source. They are not intended to be main
sources of heat during the normal heating season.
Note: There may be trace of smoke or odour when unit is first operat-
ed. Do not be on the heating coil during the manufacturing process. It
will quickly evaporate, and should not reoccur.
5. This heater cannot achieve accurate temperature control of the enviro-
ment, and thus cannot be used as insulation device for storage envi-
ronment, items, animals and plants.
CLEANING AND MAINTENANCE INSTRUCTION
5
To Next Page
Loading...