M6*43
M6*30
M6*30
M6*20
Install the armrests with and .
Install the mechanism on the seat.
Install the armrests on the back.
Install the armrests on the seat.
(
Place the seat on the gas lift.
Install the headrest on back with and
then cover on the headrest.
Position all the screws, but DO NOT twist too tight.
For best alignment,it’s best to put them with 70%
screw filling and then get the rest work done.
Use the packing box for installation, it is easier to
install the product by one person.
Tighten all the
screws completely
in step and .
1. Put the gasket between screw and .
2. The armrests have left and right positions, install
them as shown.
M6*20
To Next Page
Loading...
