COMHOMA H7137-KD User Manual

󹆏
1.
2.
Carefully unpack and place parts
on a clean flat surface.
Insert the M6x125 screw into the
metal pipe 󹆈, thread the screw
out of the metal pipe 󹆈 and align
it with the holes of the two sides
of the iron frame R 🅣, and install
the metal pipe 󹆈 on the iron
frames R.
Please repeat this operation for
other 6 metal pipes 󹆈.
*NOTE：DO NOT tighten the screws
completely until all the screws are
fixed in the correct position.
󹆈
󹆊
󹆑
󹋛
assemble
the chair.

COMHOMA H7137-KD Specifications

General

Brand	COMHOMA
Model	H7137-KD
Category	Indoor Furnishing
Language	English