Do you have a question about the ComMarker B3 and is the answer not in the manual?
| Laser Power | 20W |
|---|---|
| Engraving Area | 110mm x 110mm |
| Laser Wavelength | 1064 nm |
| Marking Speed | ≤7000mm/s |
| Minimum Line Width | 0.01mm |
| Repeatability | ±0.01mm |
| Cooling Method | Air cooling |
| Operating System | Windows XP/7/8/10 |
| Laser Type | Fiber Laser |
| Power Supply | AC 100-240V, 50/60Hz |
| Control Software | EzCad2 |
| Supported File Formats | PLT, DXF, BMP, JPG, JPEG, AI, TIF, GIF, PNG |