Go to outside
Outside
Outside
Setting the electronic-key.
Note
Warning!
If you register or re-register new electronic-keys,
you need to register all electronic-keys at once.
Open the battery cover, Push the
registration button once then you
can hear “Beep” sound.
Lift up the cover of keypad
Contact the electronic-key to the
electronic-key receiver in order.
(You can hear the sound when you
register each electronic-key)
You can complete the registration
when you close the cover of
keypad or push the [ ] button on
the keypad.
Warning!
If you add the other electronic-key, you repeat
③, ④ until turn off the lights on keypad.
(Electronic-key can be registered up to 30.)
The registration will be canceled when you do not contact any
electronic-keys for 10 seconds after push the registration button.
If you register new electronic-keys, old one will be deleted
automatically.
“Beep”“Beep”
“Beep”“Beep”
To Next Page
Loading...
Need help?
General
