30
7.3. Etc
Door Open
1) Touch the keypad on the door lock (DDL).
2) If the "Auto Setup" is set, the door automatically
opens.
3) If "Auto Access" has not been set, you can press the
"Door open" button on the Mobile Appliance to enter
or exit.
Door lock(DDL) setting
Setting Manual Lock
1) Touch the keypad of the door lock (DDL).
2) Enter the password for the door lock. (Ex)) password:
2580)
3) Enter #+#+7.
(Ex: 2580##7)
Setting Auto Lock
1) Touch the keypad of the door lock (DDL).
2) Enter the password for the door lock. (Ex)) password:
2580)
3) Enter #+#+4.
(Ex: 2580##4)
※ If you set the door lock (DDL) manually, you must touch the keypad to
lock the door when closing the door lock
To Next Page
Loading...
Need help?
General
