C128/C128D FILE COPY 2
VERSION 1.2.1
REQUIRED EQUIPMENT: C128 OR C128D COMPUTER
1571 SINGLE DISK DRIVE (MANDATORY)
1571 SINGLE DISK DRIVE (C128 ONLY)
DATA DISKETTE
FORMATTED DISKETTE
40 COLUMN MONITOR OR TV SET
VERSION 1.2 DIAGNOSTIC DISKETTE
DESIGNED TO COPY : FILES FROM ONE DRIVE TO ANOTHER
+------------------------------------------------------------------------------ +
THE DRIVES BEING USED MUST BE SET TO DIFFERENT DEVICE NUMBERS
THE DISKETTE IN THE DESTINATION DISKETTE MUST BE FORMATTED
PRIOR TO ATTEMPTING TO COPY FILES TO IT
+------------------------------------------------------------------------------ +
The File Copy 2 Program is a File Copy Utility Program to allow files from
one drive to be copied to another drive connected VIA the Serial Bus.
FILE COPY 2 OPTIONS
FILE TRANSFER OPTIONS
* Input Source Disk Unit (Source Drive Device Number)
* Data Diskette Must be Inserted in the Source Drive
* Input Destination Disk Unit (Destination Drive Device Number)
* Formatted Diskette Must be Inserted in the Destination Drive
* Write-Protect Tab Must be OPEN
* Template or RETURN
* If a File Name is Entered, only that file will be displayed
for the File Copy Selection Option
* If Selected Characters are entered followed by an [*] Symbol,
only files which begin with these characters will be displayed
for the File Copy Selection Option
* If RETURN is selected, all files will be displayed for the File Copy
Selection Option
* If the Destination Diskette is Not Formatted, a Read Error will
be displayed here
FILE COPY READ OPTION
* The Directory of Selected Files is read and Number of Files Targeted
for copying is displayed
Page 3-4
To Next Page
Loading...
