1571/C128D FILE SCRATCHER
VERSION 1.2.1
REQUIRED EQUIPMENT : C128 OR C128D COMPUTER
1571 SINGLE DISK DRIVE (C128 ONLY)
40 COLUMN MONITOR OR TV SET
DATA DISKETTE
VERSION 1.2 DIAGNOSTIC DISKETTE
The File Scratcher Program is a Disk Utility Program to allow Files
to be Scratched under Program Control.
FILE SCRATCHER OPTIONS
* Press (0) - Select Device Number >> [8] or [9]
* This option allows Files to be Scratched from a Device
set to either Device Number [8] or [9]
* Press RETURN - Start Scratcher
Displays Prompts for Input Information
* Press SPACE - Load Diagnostic Menu
* Insert Version 1.2 Diagnostic Diskette
* Press (8) - Load From Device # » [8]
* Loads Version 1.2 Diagnostic Menu From Device Number [8]
* Press (9) - Load From Device # » [9]
* Loads Version 1.2 Diagnostic Menu From Device Number [9]
* Press Return - Return To Menu
Displays File Scratcher Main Menu
FILE SCRATCHER INFORMATION
* File Name - Enter Name of File to be Scratched
* The File must be Entered Exactly as it is Named on the Diskette
* Press (S) - Information is Correct - Scratch The File
* Press (A) - Wrong Information Entered - Do Not Scratch File
* Press RETURN - Return To Menu
Displays File Scratcher Main Menu
SCREEN DISPLAY
DESIGNED TO SCRATCH: FILES FROM A DATA DISKETTE
Scratching File
.......
(Name Of File Being Scratched)
Device Number
.......
(Device Number of Drive)
Disk Status ........ (Good / Bad)
* Press RETURN - Return To Menu
Displays File Scratcher Main Menu *
* If a File has been scratched, the BAM will be updated before the
File Scratcher Main Menu is Displayed
Page 3-8