Commodore 1581 - Concat Command; Scratch Command

1581 FILE SCRATCHER
VERSION 1.5.1
DESIGNED TO SCRATCH: FILES FROM A DATA DISKETTE
REQUIRED EQUIPMENT : C128 OR C128D COMPUTER
1581 SINGLE DISK DRIVE
40 COLUMN MONITOR OR TV SET
DATA DISKETTE
VERSION 1.5 DIAGNOSTIC DISKETTE
The File Scratcher Program is a Disk Utility Program to allow Files
to be Scratched under Program Control.
FILE SCRATCHER OPTIONS
* Press (0) - Select Device Number >> [8] or [9]
* This option allows Files to be Scratched from a Device
set to either Device Number [8] or [9]
* Press RETURN - Start Scratcher
Displays Prompts for Input Information
* Press SPACE - Load Diagnostic Menu
* Insert Version 1.5 Diagnostic Diskette
* Press (8) -— Load From Device # >> [8]
* Loads Version 1.5 Diagnostic Menu From Device Number [8]
* Press (9) - Load From Device # >> [9]
* Loads Version 1.5 Diagnostic Menu From Device Number [9]
* Press Return - Return To Menu
Displays File Scratcher Main Menu
FILE SCRATCHER INFORMATION
* File Name - Enter Name of File to be Scratched
* The File must be Entered Exactly as it is Named on the Diskette
* Press (S) - Information is Correct - Scratch The File
* Press (A) - Wrong Information Entered - Do Not Scratch File
* Press RETURN - Return To Menu
Displays File Scratcher Main Menu
SCREEN DISPLAY
Scratching File ........ (Name Of File Being Scratched)
Device Number eeeeeceee (Device Number of Drive)
Disk Status eceeeeee (Good / Bad)
* Press RETURN - Return To Menu
Displays File Scratcher Main Menu
* If a File has been scratched, the BAM will be updated before the
File Scratcher Main Menu is Displayed
Page 3-7