Commodore 1581 - Locked Files; Rename Command

C128/C128D BASIC 7.0 COMMANDS
VERSION 1.5
The following are some of the most common Basic Commands used in the
operation of the C128 and C128D Computers. Also listed is a format
example of each command.
For more detailed operation commands, please refer to the C128 or
C128D System Guide.
4+------------ -+----- 4----------- --- - - - + + = + + +
l COMMAND FUNCTION | COMMAND FORMAT
~—---- +--+ + Foon nn ne ene ce ene es enw ees eeeew nnn}
[FORMAT] ‘or [NEW] HEADER “Disk Name", Dx, ID, Udn
a Blank Diskette
* Disk Name Any Combination of Digits or
Letters (Max 16 Characters)
* x = Drive Number (Optional)
(Always [0] for 1581/C128D)
* ID = Any (2) Digits or Numbers
(Must be Two Characters)
* dan = Device Number of Drive
(Optional if Device Number [8])
+-2--------------- == +-------- -- + - = == +
Example: To FORMAT a Diskette with the Disk Name [COMMODORE] with
an ID [BM] in Drive [0] of Device Number [8]
HEADER “COMMODORE", DO, IBM - Press RETURN
AT THE [ARE YOU SURE] ? PROMPT - Press [Y] -—- Press RETURN
Example: To FORMAT a Diskette with the Disk Name [COMMODORE] with
an ID [BM] in Drive [0] of Device Number [9]
HEADER "COMMODORE", DO, IBM, U9 - Press RETURN
AT THE [ARE YOU SURE] ? PROMPT - Press [Y] - Press RETURN
+------------------- +—-------- --- ---- - - - +--+ +
COMMAND FUNCTION | COMMAND FORMAT |
----------- + $---- ~~~ ~~~ + + + + + e+ ¢
[SAVE] a Program DSAVE "Program Name", Dx, Udn
to a Formatted
Diskette * Program Name = Any Combination of Digits or
Letters (Max 16 Characters)
* xX = Drive Number (Optional)
(Always [0] for 1581/C128D)
* dn = Device Number of Drive
(Optional if Device Number [8])
+—-------~~+-—-~-~.=--- $------ +
Example: To SAVE a Program called [COMMODORE] to Drive [0]
on Device Number [8]
DSAVE “COMMODORE", DO - Press RETURN
Example: To SAVE a Program called [COMMODORE] to Drive [0]
on Device Number [9]
DSAVE "COMMODORE", DO, U9 - Press RETURN