OWNERS MANUAL STUDEN CANOPY COMMODORE
7. Recheck the order of lines connection and the orientation of the canopy. Make sure that after
the opening canopy will fly forward! Fix errors if any.
8. Tight up the soft links* and fix them inside the risers to the special tapes with the thread (or
tight up the rapid-links with help of the wrench and cover them with protective slider bumpers.)
* Soft links setup (shipped with the Skylark® canopies):
Make the first loop, letting the end of the soft link through the riser and then through the respective
lines group.
A. Make the second loop in the same order
B. Let the end of the soft link under its restrictive tab and then put it on its top.
C. Rotate the soft link to hide its tab inside the riser.
To Next Page
Loading...