CommScope RUCKUS SmartZone 144 - Access Upgrade Section; Upload Patch File; Apply Patch; Related Documentation

2. Go to Administraon > Upgrade.
The Upgrade tab page appears.
3. Select the DP Patch tab.
The DP Patch page appears.
4. Select the SZ144-D tab.
5. In Patch File Upload, click Browse to select the patch le
(.ximg le).
6. Click Upload, and the patch le is uploaded.
7. From the Data Planes secon, select the data plane that you
dened on Step 10 on page 2 and click Upgrade.
8. Click Apply to apply the patch le version to the SZ144-D.
You have successfully upgraded the data plane.
Related Documentaon
If you need more informaon about the SmartZone 144 Data
Plane or the SmartLicense plaorm, refer to the following
documents, which are available for download on the RUCKUS
Support website:
• For informaon on how to perform advanced conguraon
tasks and AP management and monitoring, refer to the vSZ-H
Administrator Guide.
• For a complete list of documentaon on the SmartZone 144
Data Plane, refer to the release notes.
• For more informaon on how to manage your SmartZone 144
Data Plane licenses, refer to the SmartLicense User Guide.
• You can congure the SZ144-D from the command line
interface (CLI). For informaon on how to use the CLI to
congure the SZ144-D, see the SmartZone100-D / vSZ-D
Command Reference Guide.
©
2020 CommScope, Inc. All rights reserved.
ARRIS, the ARRIS logo, COMMSCOPE, RUCKUS, RUCKUS WIRELESS, the Ruckus
logo, and the Big Dog design are trademarks of CommScope, Inc. and/or its
aliates. Wi-Fi Alliance, Wi-Fi, the Wi-Fi logo, Wi-Fi Cered, the Wi-Fi
CERTIFIED logo, Wi-Fi Protected Access, the Wi-Fi Protected Setup logo, Wi-Fi
Protected Setup, Wi-Fi Mulmedia and WPA2 and WMM are trademarks or
registered trademarks of Wi-Fi Alliance. All other trademarks are the property of
their respecve owners.
Copyright
©
2020 CommScope, Inc. All rights reserved. Page 3 of 3
Published August 2020, Part Number 800-72550-001 Rev C