To Next PageTo Next Page
Need help?Do you have a question about the COMPANION 137.232040 and is the answer not in the manual?
Comprehensive safety guidelines for operating power tools, covering safe practices and hazard avoidance.
Essential safety rules and precautions for the safe operation of the table saw.
Guidelines for connecting the table saw to a safe and appropriate power supply.
Specifications and guidelines for using safe and properly gauged extension cords.
Proper grounding procedures to prevent electrical shock and ensure safety.
List and advice on recommended accessories for the table saw.
Instructions for unpacking and verifying all parts are present and undamaged.
Step-by-step instructions for assembling the table saw stand.
Procedure for attaching the table saw unit to its assembled stand.
Instructions for securely mounting the table saw to a workbench.
Guide for attaching the handwheel for blade height and tilt adjustments.
Instructions for assembling and installing the rip fence.
Detailed steps for attaching the right side table extension.
Procedure for installing and replacing the saw blade, including safety precautions.
Instructions for assembling and properly aligning the blade guard and splitter.
Guide for adjusting the miter gauge for accurate angle cuts.
Steps to adjust the rip fence for parallel alignment with the blade.
Procedure for calibrating the rip fence measurement indicator.
Method for quickly adjusting the blade's tilt angle.
Fine-tuning the blade's tilt angle for precise bevel cuts.
Instructions for raising and lowering the saw blade to the desired cutting depth.
Ensuring the blade aligns correctly with the miter gauge groove for accurate cuts.
Detailed procedure for aligning the blade parallel to the miter gauge groove.
Procedure for setting and verifying the 0-degree blade bevel angle.
Calibrating the bevel angle indicator pointer for accuracy.
Procedure for setting and verifying the 45-degree blade bevel angle.
Fundamental operations for starting, stopping, and protecting the table saw.
Overview of different types of cuts: ripping and crosscutting.
Instructions for performing rip cuts along the length of the workpiece.
Safe techniques for ripping narrow or small pieces of material.
Procedure for making accurate 90-degree crosscuts using the miter gauge.
Performing crosscuts with the blade set at a bevel angle.
Executing cuts that combine miter and bevel angles simultaneously.
Guidance on attaching wood facing to the rip fence for specific cuts.
Instructions for performing dado cuts, including blade and insert requirements.
Guidelines on choosing appropriate blades for the table saw.
Routine cleaning, polishing, and inspection of the table saw.
Checking and adjusting the blade raising and tilting mechanisms for proper function.
Recommendations for lubricating mechanical parts of the table saw.
Guide to diagnosing and resolving common problems encountered with the table saw.
Detailed list of all parts for the 10" table saw with identification numbers.
General
