To Next PageTo Next Page
Need help?Do you have a question about the COMPANION 27804 and is the answer not in the manual?
General| Brand | COMPANION |
|---|---|
| Model | 27804 |
| Category | Lawn Mower |
| Language | English |
Learn how to operate the equipment safely and correctly.
Perform pre-operation checks and safety procedures before using the machine.
Follow safe operating practices to prevent accidents and injuries.
Steps for assembling the steering wheel onto the tractor.
Instructions for mounting and adjusting the tractor seat.
Procedure for safely installing the tractor battery.
Steps for removing and installing the cutting unit and mulch plate.
Identifies and explains the location and function of all tractor controls.
Explains the operation of brake, clutch, motion control, and cutting unit levers.
Explains how to engage and disengage the cutting unit.
Details how to raise and lower the cutting unit for transport and operation.
Explains the function and positions of the ignition lock and key.
Instructions on how to engage and disengage the parking brake.
Explains the free-wheel control and how to start the engine using the choke.
Safe instructions for filling the fuel tank with gasoline.
Procedure for checking and maintaining the engine oil level.
Importance and steps for checking tire inflation pressure.
Step-by-step guide for starting the tractor engine.
Special procedures for cold starts and purging the transmission.
Provides advice for optimal grass cutting results.
Critical safety information regarding operating the tractor on slopes.
Guidance on driving direction for effective grass cutting.
Safe steps for turning off the tractor engine.
Warning about leaving the ignition key in the machine.
Outlines routine maintenance tasks and intervals for optimal performance.
Instructions for accessing components by opening the hood.
Instructions for blade sharpening, replacement, and installation.
Steps for adjusting the tractor's braking system.
Procedures for removing and installing the cutting unit.
Procedures for adjusting the cutting unit's height and side-to-side level.
Procedure for adjusting the motion control lever for neutral position.
Diagnoses and solutions for engine start and running issues.
Addresses problems with battery, lighting, vibration, and cutting performance.
Steps for cleaning and preparing the tractor for storage.
Details for ordering replacement parts and warranty service.
