1-10 Product Description
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: David Calvert Saved date: 03/28/00 9:32 AM
Part Number: 177485-001 File name: CH01.doc
Disks Menu
Item Function Default
Internal
FDC
Sets when an internal diskette drive is present.
A check mark indicates that the item is
Enabled. An underline indicates Disabled.
Enabled
Diskette
Drives
Sets the type of diskette disk. 1.44MB
Internal
HDC
Sets when an internal hard drive is present. A
check mark indicates that the item is Enabled.
An underline indicates Disabled.
Enabled
IDE
Settings
Sets the type of hard disk drive in the system.
HDD Timing – Sets the data transmit mode of
the hard drive. The default is Ultra DMA-33.
I/O 32 bit Transfer – If enabled, allows for a
faster transfer rate. The effect is more
noticeable under DOS. The default setting is
Enabled.
HDD Block Transfer – If enabled, allows for a
large capacity hard disk. The default setting is
Enabled.
N/A
Virus Alert Provides warning messages if the hard disk
boot sector (partition table) has changed. A
checkmark indicates that the item is Enabled.
An underline indicates Disabled.
Enabled
To Next Page
Loading...
