Removal and Replacement Preliminaries 4-1
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: David Calvert Saved date: 03/28/00 9:38 AM
Pages: 6 Words: 1247 Template: c:\msoffice\templates\ref\ref.dot
Part Number: 177845-001 File name: CH04.doc
chapter
4
REMOVAL AND REPLACEMENT
PRELIMINARIES
This chapter provides essential information for proper and safe removal
and replacement service.
4.1 Tools Required
You will need the following tools to complete the removal and
replacement procedures:
■ Magnetic Phillips screwdriver
■ Tool kit (includes connector removal tool, loopback plugs, and case
utility tool)
4.2 Service Considerations
Listed below are some of the considerations that you should keep in mind
during disassembly and assembly procedures.
IMPORTANT: As you remove each subassembly from the computer, place
it (and all accompanying screws) away from the work area to prevent
damage.
Plastic Parts
Using excessive force during disassembly and reassembly can damage
plastic parts. Use care when handling the plastic parts. Apply pressure
only at the points designated in the maintenance instructions.
To Next Page
Loading...
