Compaq 100 Series - Preparing the Computer for Disassembly

Removal and Replacement Procedures 5-3
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM
Part Number: 177845-001 File name: CH05.doc
5.3 Preparing the Computer for Disassembly
Perform the following steps before disassembling the computer. Consult
the computer reference guide for instructions on the steps below.
1. Remove any diskettes installed in the diskette drive.
2. Remove any CD-ROM discs installed in the CD-ROM drive.
3. Turn off the computer and close it.
4. Disconnect the AC Adapter and external devices.
5. Remove the battery pack (Section 5.4).