Removal and Replacement Procedures 5-13
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM
Part Number: 177845-001 File name: CH05.doc
5. Insert the tip of a flat-blade screwdriver into the left socket ➊. This
socket is marked “SKT OPEN” (Figure 5-11).
6. Swing the screwdriver to the right to release the processor ➋.
7. Remove the processor.
Figure 5-11. Removing the Processor
To Next Page
Loading...
