Reference Guide 6-23
Writer: Debbie Thomson Saved By: Alyce Klingler-Castle Saved Date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
Installing a Speaker
in the Expansion
Board Cage
To install an optional speaker in the expansion board cage,
complete the following steps:
1. Remove the expansion board cage from the computer
chassis.
2. Slide the speaker under the metal tabs on the expansion
board cage.
3. Secure the speaker by inserting the screw in the top screw
hole, as indicated in the illustration below.
4. Connect the speaker wires to the riser board, as indicated in
the illustration below.
Installing the Speaker, Securing the Speaker, and Connecting the Speaker Wires
To Next Page
Loading...
