7-34 Upgrading the Minitower Computer
Writer: Your Name Saved by: Alyce Klingler-Castle Saved date: 06/13/97 5:49 PM
Pages: 36 Words: 4809 Template: c:\msoffice\templates\comm.dot
File Name Ch7.doc Part Number 270844-001
4. Remove the three screws securing the power supply to the
back of the computer chassis.
5. Slide the power supply toward the front of the computer
chassis and lift out to remove.
Removing the Power Supply
Installing the Power
Supply
To install the power supply, complete the following steps:
!
WARNING:
This procedure should be performed only by qualified
personnel. Do not reconnect power to the computer until the
computer cover is replaced. Connecting the power before replacing
the computer cover can result in personal injury or equipment
damage.
1. Place the power supply in the computer chassis and slide
the power supply to the rear of the chassis.
2. Hold the power supply in place and secure the power
supply to the chassis with the three screws.
To Next Page
Loading...
