Reference Guide 6-9
Writer: Debbie Thomson Saved By: Alyce Klingler-Castle Saved Date: 06/13/97 5:32 PM
Pages: 37 Words: 5251 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 270844-002
6. Grasp the front of the drive cage and pull to slide the drive
cage out of the chassis.
✎
The drive cage will slide out halfway and stop.
Sliding Out the Drive Cage
Removing the Expansion Board Cage
The removable expansion board cage allows quick removal of
expansion boards, without disconnecting the cables attached to
the connectors on the boards, and without the use of tools. With
the expansion board cage removed from the chassis, you can
easily access the system board.
CAUTION:
Before removing the computer cover, ensure that the
computer is turned off and that the power cord is disconnected
from the electrical outlet.
To remove the expansion board cage, follow these steps:
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock.
For more information about Computer Setup, refer to
Chapter 8, “Using Compaq Utilities.”
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet.
4. Remove the computer cover.
To Next Page
Loading...
