Compaq 2710p - Notebook PC - HP 3 D DriveGuard Software

HP 3D DriveGuard software
The HP 3D DriveGuard software enables you to perform the following tasks:
●
Enable and disable HP 3D DriveGuard.
NOTE: Depending on your user privileges, you may not be able to enable or disable HP
3D DriveGuard.
●
Determine whether a drive in the system is supported.
●
Hide or show the icon in the notification area.
To open the software and change settings, follow these steps:
1. Double-click the icon in the notification area, at the far right of the taskbar.
– or –
Right-click the icon in the notification area, and then select Settings.
2. Click the appropriate button to change settings.
3. Click OK.
6 Chapter 4 HP 3D DriveGuard ENWW