Optional external devices
NOTE: For information about required software, drivers, and which port on the computer to use,
refer to the documentation included with the device.
To connect an external device to the computer:
NOTE: If you are connecting a powered device, be sure to turn off the device and unplug the
AC power cord.
1. Connect the device to the computer.
2. If you are connecting a powered device, plug the device power cord into a grounded AC outlet.
3. Turn on the device.
To disconnect an unpowered external device, turn off the device, and then disconnect it from the
computer. To disconnect a powered external device, turn off the device, disconnect it from the computer,
and then unplug the AC power cord.
20 Chapter 8 Using external drives ENWW
To Next Page
Loading...
