First-time setup
Getting Started 1–3
Setting up the computer
Computer setup involves the following tasks:
1. Inserting the battery into the computer
2. Connecting the computer to external power
✎
The battery begins to charge.
3. Turning on the computer
4. Setting up the software
5. Creating recovery discs (recommended)
✎
Refer to Appendix B, “Backup and recovery,” for
instructions.
Ä
CAUTION: Reduce the risk of file corruption by observing the following
practices during the hardware and software setup procedures:
■ Do not unplug the computer from external power.
■ Do not shut down the computer or initiate Sleep or Hibernation.
To Next Page
Loading...
