Setting Security Features 4-5
Writer: Rebecca Wiggins Saved by: Johnnie Abercrombie Saved date: 10/07/97 4:58 PM
Part Number: 284809-003 File name: Ch04.doc
Quick Controls establish security measures when your computer is
on but not in use. After establishing the power-on password (and
shutting down or restarting the computer), Quick Controls can be
initiated in two ways:
1. With
Fn+F6
hotkeys, which work only on the computer
keyboard.
2. With the key combination
Ctrl+Alt+L
, which works on both the
computer and external keyboards.
NOTE:
To exit QuickLock/QuickBlank once it has been activated,
enter your power-on password.
To Next Page
Loading...
