. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-24 Removal and Replacement Procedures
To remove the handle from the computer, follow these steps:
1. Close the computer and turn it bottom side up, with the handle in the carry position.
2. Remove the battery from the handle. (See " Battery Packs” in Section 5.3.3 for
instructions.)
3. Loosen the thumbscrews on the metal strip along the back of the computer by
turning them counterclockwise.
Figure 5-22.
Turning Thumbscrews to Loosen the Handle
To Next Page
Loading...
