. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal and Replacement Procedures 5-33
9. Use the case utility tool again to gently lever the side of the cover from the CPU
base
1
on the left end. This will release the tab that holds the rest of the base in
position.
10. Lift the base cover
2
from the magnesium frame.
Figure 5-30.
Releasing the Left Tab
Reverse the procedure to install the base. It is not necessary to use a tool to snap the
cover into position.
To Next Page
Loading...
