. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-44 Removal and Replacement Procedures
9. Lift the right side of the clutch cover about 0.5 inch to gain access to the microphone
cable harness, then disconnect the harness from the system board.
CAUTION:
The microphone cable harness is delicate. Mishandling may damage the
wiring.
10. Lift and remove the clutch cover assembly up and away from the computer.
Figure 5-43.
Disconnecting the Microphone and Removing the Clutch Cover
Reverse the procedure to install the clutch cover.
To Next Page
Loading...
