. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-52 Removal and Replacement Procedures
CAUTION:
To prevent electrostatic discharge damage to the System I/O board, follow the
precautions described in Chapter 4, "Removal and Replacement Preliminaries in this
guide.
14. Remove the screw that secures the heatsink to the system board.
15. Slide the heatsink out and away from the system board.
Figure 5-49.
Removing the Heatsink
To install the heatsink, reverse the procedures.
To Next Page
Loading...
