Compaq Armada 4100 - Page 149

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal and Replacement Procedures 5-61
13. Lift the eject button
1
out of the magnesium frame.
14. Remove the single screw that holds the hook in place, then lift the return spring and
the hook
2
from the magnesium frame.
15. Release the ejector spring arm
3
from the post in the magnesium wall.
Figure 5-55
. Removing the DualBay Eject Button and Spring
Reverse the procedures to install the DualBay eject button.