7-56 Chapter 7, Removal and Replacement Procedures
Addendum 108431-001 (11-88) to
Manual No. 108033-003
4. Remove the external interface adapter
board.
NOTE: Inspect new external interface
adapter board for shipping damage
prior to installation.
To replace the external interface adapter board,
reverse steps 1 through 4.
NOTE: For internal or external switch settings
for the 300-/600-Megabyte Fixed Disk
Drive Expansion Unit, see Chapter 8,
JUMPER POSITIONS AND SWITCH
SETTINGS.
For internal or external cable connec-
tions and configurations for the
300-/600-Megabyte Fixed Disk Drive
Expansion Unit, see Chapter 9, MASS
STORAGE CONFIGURATIONS.
To Next Page
Loading...
