Compaq DESKPRO 386 - Chapter 8 JUMPER SETTINGS AND SWITCH SETTINGS; 8.1 INTRODUCTION

Maintenance and Service Guide 8-1
8.1 INTRODUCTION
This chapter shows the switch and jumper loca-
tions on the following:
□ System board
□ 32-bit system memory board
□ .5- to 2-megabyte 16-bit memory expansion
board
□ 1-to 2-megabyte or 4-to 8-megabyte 32-bit
memory expansion board
□ ESDI Fixed Disk Drive Controller Board
□ Multipurpose fixed disk controller board
□ Fixed disk controller board
□ Tape adapter board
□ COMPAQ Enhanced Color Graphics Board
□ Video display controller board
□ COMPAQ Video Graphics Controller Board
□ Asynchronous communications/parallel
printer board
□ ESDI External Fixed Disk Controller Board
Addendum 108431-001 (11-88) to
Manual No. 108033-003
Chapter 8
JUMPER SETTINGS AND
SWITCH SETTINGS