Guide to Features & Upgrades
2-7
Writer: Lydia Sanchez Saved By: Lydia Sanchez Saved Date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
7. Before you install each drive into the chassis, turn it so that
it is in the same orientation as the internal 3.5-inch drive.
The bottom of the drive should be parallel to drivelock 1.
✎
The diskette drive should always be placed in the bay
nearest the internal 3.5-inch drives in the minitower
configuration for proper clearance within the chassis.
Installing a Drive in the Minitower Configuration
8. Gently slide the drive into the bay. When the drive is
properly inserted, the drivelock will secure it.
CAUTION:
The use of unnecessary force may result in damage to
the drives.
9. Reconnect all power and data cables to the drives in the
5.25-inch drive bays.
To Next Page
Loading...
