2-14
Upgrading the Computer
Writer: Lydia Sanchez Saved by: Lydia Sanchez Saved date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
3. Open both latches 1 of the DIMM socket, and insert the
memory module 2 into the socket.
Begin by installing a module into the socket nearest the
preinstalled module, and install the modules following the
numerical order of the sockets.
Match the notch on the module with the tab on the memory
socket. Push the module down into the socket, ensuring
that the module is fully inserted and properly seated 3.
Installing a DIMM Module
4.
Repeat step 3 for any additional modules that you want to
install.
5. Replace the computer access panel.
6. Turn on the computer.
The computer should automatically recognize the added
memory.
To Next Page
Loading...
