Guide to Features & Upgrades
2-19
Writer: Lydia Sanchez Saved By: Lydia Sanchez Saved Date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
4. Place the graphics board on a grounded, flat surface and
install the memory module so that its notch aligns with the
tab in the socket at a 30 degree angle 1, then rotate the
module until it latches into position 2.
Installing an Upgrade Memory Module on the Graphics Board
5. Replace the graphics board into the same slot and secure it
with the screw.
6. Replace the computer access panel.
7.
Change the resolution to take advantage of the additional
display modes now available with the upgraded memory.
Refer to Chapter 1, “Computer at a Glance,” for more
information.
To Next Page
Loading...
