Guide to Features & Upgrades
2-21
Writer: Lydia Sanchez Saved By: Lydia Sanchez Saved Date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
Installing a CD-ROM, DVD-ROM, Tape, or PD-CD Drive
1. Turn off the computer and any external devices, disconnect
the power cord from the power outlet, and remove the
computer access panel.
2. Install two guide screws on each side of the drive 1.
✎
Some options use metric hardware. Extra guide screws
are provided on the front of the chassis, under the front
bezel. The Compaq-supplied metric screws are black.
3. Install the drive in the desired drive bay by sliding it into
the front of the drive cage 2; the drivelock automatically
secures the drive in the bay.
✎
Be sure the guide screws line up with the guide slots in
the drive cage.
Aligning the Guide Screws and Installing an Optional 5.25-Inch Drive
To Next Page
Loading...
