2-22
Upgrading the Computer
Writer: Lydia Sanchez Saved by: Lydia Sanchez Saved date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
4.
Connect the drive power
1
and signal
2
cables and, if it is
a CD-ROM, DVD-ROM, or PD-CD drive, connect the
audio cable
3
. The other end of the audio cable
3
should
be connected to the optional audio board if installed.
Connecting the Drive Cables
5.
Remove the appropriate bezel blank from the subpanel
inside the front bezel. (Refer to the section “Removing
Bezel Blanks.”)
6.
Replace the computer access panel.
7.
Reconfigure the computer, if necessary. Refer to the
“When to Reconfigure the Computer” section in this
chapter.
To Next Page
Loading...
