Guide to Features & Upgrades
2-23
Writer: Lydia Sanchez Saved By: Lydia Sanchez Saved Date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay
1. Turn off the computer and any external drives, disconnect
the power cord from the power outlet, and remove the
computer access panel.
2. Remove the front bezel.
3. Install one guide screw on the right side of the drive.
4. Insert the drive into the adapter so that the guide screw
aligns in the slot, and then attach with two retaining screws.
5. Snap on the brace.
Attaching a 3.5-Inch Drive to the 5.25-Inch Adapter
To Next Page
Loading...
