2-24
Upgrading the Computer
Writer: Lydia Sanchez Saved by: Lydia Sanchez Saved date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
6.
Install two guide screws on each side of the adapter
1
.
7.
Install the adapter in the desired drive bay
2
by sliding it
into the front of the drive cage; the drivelock automatically
secures the adapter when it snaps into place.
✎
The primary 3.5-inch diskette drive should only be
installed into bay 3. Bay 3 is the bottom bay in the
minitower configuration and the topmost bay in the
desktop configuration.
Aligning the Guide Screws and Installing an Adapter with a 3.5-Inch Drive
To Next Page
Loading...
