Compaq Deskpro EP 6233 - Appendix F ATI RAGE PRO AGP Graphics Card; Introduction

Technical Reference Guide
Compaq Personal Computers
Original - March 1998
F-1
Appendix F
ATI RAGE PRO AGP GRAPHICS CARD
F. Appendix F ATI RAGE PRO AGP 1X Graphics Card
F.1 INTRODUCTION
This appendix describes the ATI RAGE PRO AGP Graphics Card. The ATI RAGE PRO AGP
Graphics card is installed in the AGP slot on the system board some models. This appendix
covers the following subjects:
♦ Functional description (F.2) page F-2
♦ Display configurations (F.3) page F-4
♦ Programming (F.4) page F-5
♦ Monitor power management (F.5) page F-6
♦ Connectors (F.6) page F-6
NOTES:
-001: Card with ATX mounting bracket (shown)
-002: Card with NLX mounting bracket
Figure F–1.
ATI RAGE PRO AGP Graphics Card Layout (p/n 008061-xxx)
Monitor
Connector
Memory
Expansion
Connector
J2
VESA (Feature)
Connector (P1)
ATI
Rage Pro