COMPAQ IPAQ PM-1 3
Installing the Batteries
Your iPAQ Personal Mini-CD Player PM-1 is equipped with rechargeable batteries. You have the option
of listening to your favorite music on battery power or plugging the PM-1 into a standard electrical
outlet.
Note: Before using the PM-1 for the first time, the Ni-MH batteries should be charged for 8 hours.
To install the batteries, just follow these simple steps:
1. Slide the release lever on the side of the PM-1 to the open position to open the PM-1 cover and
access the battery compartment.
2. Push back the tab on the side of the battery compartment cover and lift up to remove it.
3. Place the rechargeable batteries that came with your PM-1 into the battery compartment according
to the diagram inside the compartment.
WARNING: Do not mix rechargeable batteries with non-rechargeable batteries.
To Next Page
Loading...
Need help?
General