Compaq N800v - Evo Notebook - Pentium 4-M 1.7 GHz - Selecting from the Tools Menu; Selecting from the Advanced Menu

To Next Page

To Previous Page

7–6 Software Guide

Setup and Diagnostic Utilities

Selecting from the Tools Menu

Selecting from the Advanced Menu

Select To Do This

HDD Self Test Options Run a quick or comprehensive self test on

any hard drive in the system.

Select To Do This

Language (or press

) Change the Computer Setup language.

Boot Options Enable/disable:

■

QuickBoot, which starts the notebook more

quickly by eliminating some startup tests.

(If you suspect a memory failure and want

to test memory automatically during

startup, disable QuickBoot.)

■

MultiBoot, which sets a startup sequence

that can include most bootable devices and

media in the system. For instructions, refer

to in this guide to the “MultiBoot” section.

Device Options

■

Enable/disable Num lock mode at startup.

■

Enable/disable multiple standard pointing

devices at startup. (To set the notebook to

support only a single, usually nonstandard,

pointing device at startup, select Disable.)

■

Select a parallel port mode: EPP

(Enhanced Parallel Port), standard,

bidirectional, or ECP (Enhanced

Capabilities Port).

continued

Other manuals for Compaq N800v - Evo Notebook - Pentium 4-M 1.7 GHz