NOTE The LAN device is not listed in Device Manager while LAN Power Save mode is
activated. To access the LAN device, do one of the following:
●
Connect external power.
●
Connect a network cable.
●
Disable LAN Power Save mode in Computer Setup.
Storing a battery
WARNING! To avoid potential safety issues, use only the battery provided with the computer,
a replacement battery provided by HP, or a compatible battery purchased as an accessory from
HP.
CAUTION To prevent damage to a battery, do not expose it to high temperatures for extended
periods of time.
If a computer will be unused and unplugged from external power for more than 2 weeks, remove the
battery and store it separately.
To prolong the charge of a stored battery, place it in a cool, dry place.
Calibrate a battery before using it if it has been stored for one month or more.
Disposing of a used battery
WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery;
short the external contacts on a battery; or dispose of a battery in fire or water. Do not expose a
battery to temperatures above 60˚C (140˚F). Replace the battery only with a battery approved
for this computer.
Refer to the Regulatory, Safety, and Environmental Notices for battery disposal information.
32 Chapter 7 Batteries ENWW
To Next Page
Loading...
