Compaq nx6320 - Notebook PC - Adding Memory to Expansion Slot

1–2 Memory Modules
Adding or replacing memory modules
Adding a memory module to the
expansion memory module slot
To add or replace a memory module in the expansion memory
module slot:
1. Save your work.
2. Shut down the computer and close the display.
If you are not sure whether the computer is off or in
hibernation, turn the computer on by pressing the power
button. Then shut down the computer through the operating
system.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove the battery pack from the computer.