Adding or replacing memory modules
Memory Modules 1–5
10. To insert a memory module:
Ä
CAUTION: To prevent damage to the memory module, be sure that
you do not bend the memory module.
a. Align the notched edge 1 of the memory module with the
tab in the memory module slot.
b. With the memory module at a 45-degree angle from the
surface of the memory module compartment, press
the module 2 into the memory module slot until it is
seated.
c. Press the memory module 3 down, applying pressure to
both the left and right edges of the memory module, until
the retention clips snap into place.
To Next Page
Loading...