Keyboard
TouchPad and Keyboard 2–3
Hotkey procedures
To use a hotkey command on the computer keyboard, either
■ Briefly press the fn key, and then briefly press the second key
of the hotkey command.
– or –
■ Press and hold down the fn key, briefly press the second key
of the hotkey command, and then release both keys at the
same time.
Initiate standby (fn+f3)
Press fn+f3 to initiate standby.
When standby is initiated, your information is stored in random
access memory (RAM), the screen is cleared, and power is
conserved. While the computer is in standby, the power light
blinks.
Ä
CAUTION: To reduce the risk of information loss, save your work
before initiating standby.
The computer must be turned on before you initiate standby. If
the computer is in hibernation, you must restore from hibernation
before you can initiate standby.
✎
To restore from hibernation, briefly press the power button.To
resume from standby, briefly press the power button, press any
key on the keyboard, or press a Quick Launch button.
The function of the
fn+f3 hotkey can be changed. For example,
you can set the
fn+f3 hotkey to initiate hibernation instead of
standby.
✎
In all Windows operating system windows, references to the
sleep button apply to the fn+f3 hotkey.
To Next Page
Loading...
