NOTE If you have set a password to be required on wakeup, you must enter your Windows
password before your work will return to the screen.
Initiating and exiting Hibernation
The system is set at the factory to initiate Hibernation after 60 minutes of inactivity or when the battery
reaches a critical battery level.
Power settings and timeouts can be changed using Power Options in Windows Control Panel.
To initiate Hibernation:
1. Click Start, and then click the arrow next to the Lock button.
2. Click Hibernate.
To exit Hibernation:
Press the power button.
The power lights turn on and your work returns to the screen where you stopped working.
NOTE If you have set a password to be required on wakeup, you must enter your Windows
password before your work will return to the screen.
2 Chapter 1 Setting power options ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To Next Page
Loading...
