Compaq Presario 3500 Series - Page 51

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
System Board continued
Disassembly Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board
Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
9. Remove the
hard drive.
10.
Remove the
processor.
11.
Disconnect the
system board
cables.
12.Remove two
screws from the
back of the
computer on
both sides of
the LCD
connector.
13.Remove seven
screws from the
system board.
14.Slide the
system board
forwards and lift
the system
board out of the
computer.
End of
sequence.
Replacement
To replace the
system board,
reverse the
removal
procedure.
NOTE:
Be sure to
remove
components
such as
DIMMs,
processor,
and video
memory
before
replacing
the System
Board.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/sys2.html [12/9/2002 4:36:34 PM]