Compaq Presario 5000 Series - Graphics Card

United States
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Compaq Presario Internet PC 5000 Series Computers
Removal and Replacement Procedures
PRODUCT DESCRIPTION TROUBLESHOOTING ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
Electrostatic
Discharge
Service
Considerations
Preparation for
Disassembly
Serial Number
Side Access Panel
Graphics Card
Expansion Card
(Modem or Network
Card)
1394 Card
Memory Module
Hard Drive
Disk Drive
Removing the Top
Door
Removing the CD
Storage Door
(Lower Front Panel -
Open the CD Storage
Door)
Optical and Mass
Removing the Graphics Card
Removal
Perform the preparation
procedures.
1.
Remove the screw securing
the graphics card.
2.
Pull the graphics card by
using a gentle side-to-side
rocking motion from the AGP
slot on the system board.
3.
Replacement
Align the graphics card with
AGP slot on the system
board. Insert the card
carefully and firmly into the
connector.
1.
Replace the screw securing
the graphics card to the
chassis.
2.