United States December 16, 2002
Maintenance & Service Guide
Presario 5600 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Front Bezel
Disassembly
Sequence
Hood
Front Bezel
Card Guides
Fan
USB Cables
Creativity Center
Mass Storage Devices
Memory
Option Card Retainer
Graphics Board
Fax/Modem
Serial Port
Homenet Daughter Board
Processor
Processor Goal Posts
System Board Cables
System Board
RTC Battery
I/O Panel
Power Supply
Removal
1.
Perform the
preparation for disassembly procedures.
2.
Remove the hood.
3.
Disconnect the power cable from connector J14 on
the system board.
4.
Using a standard screwdriver, disengage the two
bottom clips from the chassis then disengage the
remaining four clips as illustrated.
Replacement
To replace the front bezel, reverse the removal
procedure.
privacy statement and legal notices
To Next Page
Loading...
